guidelite ECO
Vertical guide trough
Vertical guide trough
guidelite ECO vertical guide trough
Very light, solid plastic guide trough, can be installed very quickly and easily
guidelite ECO is a very cost-effective, PVC guide trough that can be installed easily and extremely quickly. The construction principle of tried-and-tested energy chain and polymer trough is very safe as there are no open electric conductors. In contrast to busbar systems, light signals, liquids and air can be guided safely. igus guidelite ECO is available ready to install from €38/m (*including trough, e-chain® E2.15.050.048.0 filling 5 x single cores of 6mm² each plus bus or FOC cable)
| Stroke height |
| Material channel sides | ||||
|---|---|---|---|---|---|---|
| up to 40m | 4m/s² | PVC |
Request guidelite ECO now
Tech up
- Very light, solid plastic guide trough
- Very safe – no exposed electrical conductors
- Can also be used for replacing busbar systems.
- In contrast to busbar systems, light signals, liquids and air can be guided safely.
- Very easy and extremely quickly installed
Cost down
- Very simple and extremely quick installation saves installation time and costs
- Predictive maintenance – optional with the isense additional module
Proof
- guidelite ECO is 59% lighter than comparable systems made of steel or aluminium (tested in the igus laboratory in direct comparison to micro flizz 10)
Sustainability
- Due to the 59% lighter construction, less mass needed to be accelerated. Smaller drives and motors can be used; which saves energy
- Have your energy chains processed as part of the igus chainge recycling programme no matter which manufacturer they came from
- igus supports the circular economy of plastics and invests in chemical recycling
Product features
The guidelite ECO is small and suitable for laying all sorts of round cables in lifters and small storage and retrieval units. It is also used for replacing busbar systems. The guidelite ECO is an uninterrupted guide trough, which is supported by a console every 500mm.This vertical iglidur polymer guide trough is suitable for e-chains® with part numbers E2.15.050.048.0, E2C.15.050.048.0 and E2i.15.050.048.0.
Material:
- Console made of igumid G
- Channel sides of PVC
Similar products
guidelite guide trough
- Time saving through fast assembly
- Very lightweight polymer components - quieter than troughs made from steel
- Cost-effective
- Corrosion-free
To the product
guidefast guide trough
- quick and easy fixation with clamping blocks
- One-piece steel guide trough in 2m lengths
- Wear-reducing: glide bar for centre fed installations
To the product
More guide troughs
Guide trough is used in long travels where the e-chain® glides (according to chain type from 5-12m). They support the smooth low friction operation of the igus energy chains and energy tubes.Go to overview
Guide troughs from igus in use
... in slab handling cranes
Find out more
... in hot galvanising plant
Find out more
... in the composting plant
Find out more
... in gantry loaders
Find out more
... in stone sawing plants
Find out more
... in the shipyard
Find out more
