Assembly Instructions for e-chain® System E4/4

Video demo for the assembly of System E4 chains

Assembling E-Chains and E-Tubes

System E4/4 Assembly Remove crossbars at connection points, push tongue and groove into each other at a slight angle
System E4/4 Assembly Join the side links - join the second side link by pressing from the top

System E4/4 Assembly Join the side links together on the opposite side by applying pressure to the outer link

System E4/4 Assembly Assemble crossbars - Push down and snap in by using a screwdriver

System E4/4 Assembly Assemble clips (e-chains® with crossbars every other link) - Push down and snap in

System E4/4 Assembly Assemble E-Tube lids/bottoms - Attach to the connector at an angle - Snap in

Separating e-chains® and E-Tubes

System E4/4 Assembly Remove crossbars, clips, and lids on two adjacent chain links. Guide the screwdriver into the slot between side links

System E4/4 Assembly and release it by levering it and separate the e-chain®

Opening e-chains®

System E4/4 Assembly Remove crossbars - Insert screwdriver into the slot, push down, release by lever action

System E4/4 Assembly Remove clips - Insert screwdriver into the slot and push down, release by lever action

Opening E-Tube

System E4/4 Assembly Remove lids/bottoms - Insert screwdriver into the slot, release by lever action

System E4/4 Assembly Release only one side to swivel the lid

System E4 - Installation - Video

Installation video as wmv file

Still faster assembly with optional separator with quick release fastener

Installation video as wmv file