Dual shaft stepper motors

Dual shaft stepper motors

... two drives in one ...

Stepper motors are an essential component in various industries and applications where precision and controlled movement are of utmost importance. Among the variety of stepper motors available, the dual shaft stepper motor stands out as a versatile and powerful choice.

Make a request now

Tech up

Four dual-shaft stepper motors for space-saving design
Drive two mechanical loads with one motor
Great flexibility in setting up/connecting mechanical components

Cost down

Suitable for igus® linear drives
Space-saving design with double-shaft stepper motor helps reduce costs

Proof

Stepper motors from 0.5Nm to 5.9Nm
Use of the motor between two axes

Sustainability

Wear and maintenance-free

What is a dual shaft stepper motor?

A dual shaft stepper motor is a type of stepper motor with two output shafts. These motors feature a rotating shaft on both sides, providing greater flexibility in connecting and driving mechanical components. With one motor, two mechanical loads, e.g. two parallel linear axes, can be driven. The dual-shaft stepper motor is space-saving and reduces costs. A hand wheel can also be mounted on the second shaft end, which can be used to turn the motor by hand. There are also various possible applications for this.

Dual-shaft stepper motors are primarily used in industry to mount double-axis drives in a space-saving manner. In classic double-axis drives, the motor is installed on the side, which often leads to space problems. In designs with a dual-shaft stepper motor, the motor is located between the axes so as not to waste any installation space. The hand wheel mounted on the second shaft end can be used for pin point adjustment of a linear axis. Furthermore, with a self-locking lead screw axis, a mechanism can be adjusted in the event of a power failure. This is particularly necessary for entrances or doors.

All installation sizes at a glance:

NEMA17

NEMA23

NEMA 24

NEMA34

Technical data

Part number	Installation size	Holding torque [Nm]	Connector type	Connecting wire length [cm]
MOT-AN-S-060-005-042-L-A-AAAB	NEMA17	0.50	JST	30
MOT-AN-S-060-020-056-L-A-AAAB	NEMA23	2.00	JST	30
MOT-AN-S-060-035-060-L-A-AAAB	NEMA 24	3.50	JST	30
MOT-AN-S-060-059-086-L-A-AAAB	NEMA34	5.90	Molex	30