E2 R100 - Two-piece e-tube - Chip protection - Swivel-on lid
Since igus introduced the first openable (two-part) e-tubes in the middle of the 1980s, the product range has been supplemented with many additional parts and improvements. Energy tubes can be used in areas where there are hot chips, dirt and dust produced by woodworking, steelworks, pulp production, textile manufacture, in agriculture, coal stations and many other unfavourable ambient conditions. Decide in favour of the cost-effective alternative R100 series for applications involving slow and medium speeds.
Order free E2 R100 sample now
Inner height 21 mm
Series R117
Inner height hi: 21mmInner widths Bi: 20 - 100mm
Bend radii R: 63 - 180mm
Pitch: 30.5mm
e-tube, snap-open along the inner radius on both sides
Series R118
Inner height hi: 21mmInner widths Bi: 20 - 100mm
Bend radii R: 63 - 180mm
Pitch: 30.5mm
e-tube, snap-open along the outer radius on both sides
Inner height 40 mm
Series R157
Inner height hi: 40mmInner widths Bi: 40 - 200mm
Bend radii R: 100 - 250mm
Pitch: 46mm
e-tube, snap-open along the inner radius on both sides
Series R158
Inner height hi: 40mmInner widths Bi: 40 - 200mm
Bend radii R: 100 - 250mm
Pitch: 46mm
e-tube, snap-open along the outer radius on both sides
Inner height 50 mm
Series R167
Inner height hi: 50mmInner widths Bi: 50 - 250mm
Bend radii R: 100 - 300mm
Pitch: 58.8mm
e-tube, snap-open along the inner radius on both sides
Series R168
Inner height hi: 50mmInner widths Bi: 50 - 250mm
Bend radii R: 100 - 300mm
Pitch: 58.8mm
e-tube, snap-open along the outer radius on both sides
e-chain® selection aids
You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.Selection aids
Installation instructions
Joining and separating of the e-tubes.Assembly Instructions
Application examples
Applications in various industrial sectors and in the igus® test laboratory.E2 R100 and E2 R
Chip protection, swivelable
Excellent protection against chips (even hot chips)
Rugged and tight
Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time
Space-saving through good internal/external dimensions ratio
Modular interior separation options
Double stop dog system for longer service life and long, unsupported lengths
Universal KMA mounting brackets with potential for "all-round" fastening
Typical industrial sectors and applications
Machine tools
Timber Processing Machines
General mechanical engineering etc
In all areas exposed to dirt and chips
iF Design Award for series R117/R118 and series R68
ESD classification: electrically conductive ESD versions upon request
UL94-V0 classifications upon request
e-tubes made of igumid HT: hot chips (up to 850°C) cannot burn into them Available as custom design upon request.
Usually shipped within 1 working day
